Join the 155,000+ IMP followers

railway-international.com
MICRO EPSILON News

MICRO EPSILON: MEASURING THE WORKPIECE POSITION IN GRINDING MACHINES

Inductive sensors from Micro-Epsilon are based on the eddy current principle and designed for non-contact measurement of displacement, distance, position, oscillation and vibrations.

MICRO EPSILON: MEASURING THE WORKPIECE POSITION IN GRINDING MACHINES

World's greatest range of sensors - ideal for harsh industrial environments
Inductive sensors do not recognize non-conductive materials. For this reason, dust, dirt and oil do not affect the measurement. This fact, combined with the sensor’s robust, temperature-compensated design, enable measurements in harsh, industrial environments.
  • Robust and reliable sensors IP67
  • Pressure-resistant models up to 2,000 bar
  • Resistant to oil, dust & dirt
Measuring the workpiece position in grinding machines involves the position measurement of the crankshaft with micrometer precision using eddy current-based inductive sensors. These sensors are perfectly suitable for measurements in harsh, industrial environments as they are insensitive to oil, dirt, high pressure and high temperatures.

During the grinding process, the position between the grinding tool and the workpiece must be constantly monitored. This prevents excessive stress, damage and destruction of the workpiece and the grinding tool. For reliable position monitoring, inductive sensors based on eddy currents are used. The inductive sensors achieve accuracies in the single-digit micrometer range when measuring the workpiece position in grinding machines.

Ideal for fluctuating temperatures
The high precision measurement results provided by sensors can be influenced by fluctuating temperatures. However, every inductive eddyNCDT measuring system from Micro-Epsilon is equipped with an active temperature compensation feature that reconciles any thermal influences.
  • Active temperature compensation of sensor, cable and controller
  • Temperature range -40°C to +200°C and higher
To keep the distance to the grinding tool constant, the analog sensor signal is transmitted to a PLC. It adjusts the position of the grinding tool based on the measured values. Since cooling liquid (oil) is used for the grinding process, conventional sensors are not suitable for this application. Due to their robust design, inductive eddyNCDT series are ideally suitable for harsh environments while being insensitive to oil, dirt, pressure and high temperatures. The application solution can also be integrated into existing systems as a retrofit.

www.micro-epsilon.com

  Ask For More Information…

LinkedIn
Pinterest

Join the 155,000+ IMP followers